| Product interface specifications: |
| 1. Product Name: GMX HUB300 Built-in USB3.0 and USB2.0 Extension |
| 2. The main control chip: GL3510-QFN64+ FE8.1-SSOP16. |
| 3. Expansion interface: USB3.0 IDC 19pin*3/USB2.0 2.54 9PIN*2/USB3.0 AF Interface*1/External Power SATA Interface*1. |
| 4. Support input interface: USB3.0 IDC 19pin. |
| 5. Support output interface: USB3.0 IDC 19pin/ USB2.0 2.54 9PIN/ USB3.0 AF female |
| 6. Theoretical rate: 3.0 5Gbps+2.0 480Mbps |
| Support system: |
| 1. The computer motherboard must have an IDC 19pin expansion interface. |
| 2. Support Windows XP Vista/7/8.1/10. |
| Hardware installation: |
| 1. Connect the HUB300 product after turning off the computer. |
| 2. Disconnect the computer from the power source. |
| 3. Remove the computer cover |
| 4. Connect the USB3.0 IDC 19pin cable to the motherboard IDC 19pin connector. |
| 5. Connect the SATA power connector of the chassis to the SATA interface of the HUB300. |
| 6. Turn the computer back on after the product is connected. |
| Product packaging accessories: |
| 1. Connect the computer USB3.0 19PIN wire (50CM) |
Message US